There are several pallet racks used by warehouses. They are all created for multiple applications and types of storage facilities. Some will have a dense capacity, while other kinds offer greater accessibility to the goods.
The systems known as pallet racking have been commonly used by storage businesses and warehouses that ship, move, and store goods on pallets. These enable the warehouses to fully maximise the vertical storage and use pallets that are high as needed.
Through these Warehouse racking installations, they can hold products in an orderly manner and accessible to the staff. Every type of pallet racking solution has an appropriate use case and an inventory management system.
Drive-in System
This involves the use of a forklift for the shelving to install into the rack. Instead of a flat structure, shelves are horizontally built supported by a cross beam like how selective racks appear.
These drive-in types look like a lane that has rails on both sides. The pallets are seen on the side of the rails and are moved to the back of the rack, and the succeeding pallets are installed before the previous ones.
Normally, the inventory system that uses such a system follows a last-in, first-out method or when more palletised goods are kept. It’s hard to access the stored pallets at the back since the one before them has to be moved one by one until they reach the rear pallet. This is considered as one of the most compact racking systems there is.
Selective System
This racking system is widely-used and flexible, among others. It uses metal shelving created to hold pallets correctly. These Warehouse racking installations are pretty straightforward and enable the workers to rack and remove pallets using forklifts seamlessly.
The racks can be immediately placed at the rear of another rack, expanding the storage space up to 40%.
Cantilever System
Those warehouses that hold over-sized goods such as pipes or wood can choose the cantilever racking system. Instead of having a regular shelf or railed isle, it uses the base to support the arm tiers that are protruding.
The arms can be arranged on both sides if they want it to be standalone or mounted to a wall. The arms look like the tines of a forklift and would easily carry the stuff placed on them.
There are no other guard elements or material, it only has a base that has protruding arms. The cantilever racking system can provide support to long pallets and can be changed to carry regular-sized pallets.
Push Back System
This racking solution is almost similar to the drive-in, but it has a feature that pushes the pallets forward. In a drive-in type, the pallets at the back of the rack remain there. On the other hand, the push back type, the pallets seen at the rear, will be moved forward together with the ones before them.
During the loading phase in a push back system, the pallets can be placed in front, eliminating the process of putting palletised goods at the back, just like other racking solutions.
The process of loading and unloading for this racking type is as close to how most soda coolers in grocery shops function, pulling one can out will allow more cans pushed forward simultaneously.
A warehouse owner should always be knowledgeable of these things before they invest in one. Deploying the appropriate system will make the operations more organised and increase revenue.
